The hardware mold processing industry is developing rapidly, and the competitive pressure for enterprises is also increasing day by day. Whether in processing technology, or processing quality, the industry is constantly improving and innovating. What is the following hardware mold processing process? And how to improve the service life of hardware mold processing content, welcome to read!

What is the hardware mold processing process?

1. Underside processing, processing quantity guarantee;

2. Find the casting blank datum and check the allowance of 2D and 3D profile;

3.2D.3D surface rough processing, non-installation and non-working surface processing (including safety platform surface, buffer mounting surface, pressure plate plane, side datum surface);

4. Before semi-finishing, correct precision of side datum surface must be found;

5. Semi-finishing 2D.3D surface, finishing all kinds of installation faces (including limit block installation surface and contact surface, insert installation surface and back, punch installation surface, waste cutter installation surface and back, spring installation surface and contact surface, all kinds of travel limit working surface, oblique wedge installation surface and back), Semi-finishing all kinds of guide surface, guide hole, residual finishing process reference hole and height reference surface

6. Check the machining accuracy;

7. Fitter Mosaic technology;

8. Before finishing, find the datum surface of the process reference hole and check the allowance of the insert;

9. Finishing surface 2D.3D, side punching surface and hole position, precision mold processing technology reference hole and height reference, finishing guide surface and guide hole;

10. Check the machining accuracy of the hardware mold.

How to improve the service life of hardware mold processing:

For the user, improving the service life of the die can greatly reduce the stamping cost. The factors affecting the service life of the mold are as follows:

1. Type and thickness of materials;

2, whether to choose reasonable lower die clearance;

3, the mold structure form;

4, whether the material stamping has good lubrication;

5, whether the mold has been special surface treatment;

6, such as titanium plating, carbon titanium nitride;

7, up and down the tower of the neutral;

8. Adjust the reasonable use of gaskets;

9, whether the appropriate use of oblique cutting die;

10. Whether the die base of the machine tool has been worn out;

Thank you for reading, the above is the hardware mold processing process is what? How to improve the service life of hardware mold processing? Some content from the Internet, for reference only. If you want to know more about the precision metal mold processing details, welcome to call for detailed inquiries, dedicated to your service.