The technical level of die design and manufacturing is also a comprehensive standard to measure the technical ability of an enterprise. The manufacture and design of die are directly related to the production efficiency, quality and production cost of stamping parts. However, what should we pay attention to when using standard parts of hardware mold processing? And how to maintain the mold content, welcome to read!

What should we pay attention to when using standard parts of hardware mold?

First, reasonable mold structure design

The final use effect of high quality mold standard parts often depends on the rationality of mold structure design. In the process of mold structure design, it is best to adopt the combined mold, and the mold frame must meet the specified requirements on rigidity, strength and the template can not be too thin. If the multi-station mold is selected, it is better to choose four guide pillars to guide, so that the guiding performance will be better and the phenomenon of collision is not easy to occur between the molds.

Two, reasonable choice of mold materials

Choosing reasonable die materials can not only prolong the service life of standard die parts, but also be more convenient and efficient in the use process. It is best to choose good quality steel for the mold material, because most of the mold production projects have higher requirements for the strength and toughness of the material itself. Not only that, in addition to the high strength of the mold material, it is also necessary to do a good job of quality inspection. The module should not only meet the requirements of the supply agreement, but also the chemical composition of the module must meet the standards.

Three, reasonable design of forging process

The cold extrusion method with small deformation in multiple processes can effectively reduce the unit extrusion pressure of the die, but the billet can not be softened between processes so as to prolong the life of the die.

The above three points are about the mold standard parts in the use process need to pay attention to, do the above three points, can well extend the service life of the mold, so as to reduce the cost.

How to maintain it?

Step 1: Each mold should be equipped with inspection and maintenance table, record and statistics its use, care and damage, judge which parts, parts damage and wear degree, in order to provide information to find and solve problems.

The second step: under the condition of normal operation of the mold, test the various properties of the mold and measure the size of the molded plastic parts. From this information, the current state of the mold can be determined and damage to the cavity, core, cooling system and parting surface can be found. According to the information provided by the plastic parts, the damage state and maintenance measures of the mold can be judged.

Thank you for reading. What should we pay attention to when using standard parts for hardware mold processing? How to maintain the mold? Some content from the Internet, for reference only. If you want to know more about the precision mold processing details, welcome to call for detailed inquiries, dedicated to your service.