Slow wire is also called low speed wire, is the use of continuous moving fine metal wire (called electrode wire, generally copper wire) as the electrode, pulse spark discharge on the workpiece, produce high temperature of more than 6000 degrees, corrosion metal, cutting into the workpiece is a kind of CNC processing machine. Now let me introduce you to what is slow walking wire? And what is the use of the content, welcome to read!

What is a slow-walking wire?

Low speed unidirectional wire EDM wire cutting machine is a kind of high precision processing equipment.

Both fast and slow walking wires are EDM wire cutters. Fast wire is a kind of high speed reciprocating EDM wire cutting machine, the molybdenum wire is used repeatedly, the processing speed is slow and the precision is low. Slow wire is a low speed one-way EDM wire cutting machine, the molybdenum wire is not reused, low speed, high precision, mainly special-shaped hole and shape processing.

It uses continuously moving thin metal wires (called electrode wires) as electrodes to pulse spark discharge the workpiece, corrode the metal, and cut into shape. Mainly used for processing a variety of complex precision workpiece.

What is the use of slow walking wire?

Electric discharge wire cutting is short for electric discharge wire cutting. It was developed on the basis of EDM perforation and molding. It not only developed the application of EDM, but also replaced EDM perforation and molding in some aspects. Nowadays, wire-cut machines account for the majority of EDM machines. The finished surface is relatively rough.

Slow wire is also a kind of wire cutting, which uses continuous moving fine metal wire (called electrode wire) as the electrode, pulse spark discharge on the workpiece, corrosion metal, cutting molding. Mainly used for processing a variety of complex shape, small precision workpiece. According to the running speed of the electrode wire, EDM wire cutting machine is usually divided into two categories: one is the slow wire (also known as the low speed wire cutting machine) electrode wire as a low speed one-way movement, the general wire speed is lower than 0.2m/s, the accuracy of 0.001mm, surface quality close to the grinding level. The finished surface is very bright.

Thanks for reading. That's right. What is a slow-walking wire? What is it for? Some content from the Internet, for reference only. If you want to know more about the western slow wire processing details, welcome to call for detailed inquiries, wholeheartedly at your service.