The hardware mold processing industry is developing rapidly, and the competitive pressure for enterprises is also increasing day by day. Whether in processing technology, or processing quality, the industry is constantly improving and innovating. In this era of fierce competition, enterprises can only meet customer demand and win the market by ensuring good quality, good service and continuous innovation ability. The following to share with you about the hardware mold processing process arrangement and matters to be noted, welcome to read!

Hardware mold processing process arrangement:

1. Bottom processing, quantity guarantee;

2. Casting blank datum alignment, 2D.3D.3D shape allowance inspection;

3.2D.3D surface rough machining, non-installation and non-working surface machining (including safety platform surface). Buffer surface. Platen surface. Side datum);

4. The correct precision of the side datum must be found before semi-finishing;

5. Semi-finishing 2D.3D shape surface and precision machining of various mounting surfaces (including the mounting surface and contact surface of the limit block). Insert mounting surface and backrest. Punch mounting surface. Spring mounting surface and back. Spring mounting surface and back. Spring mounting surface and back. Various travel limit working face. Oblique wedge mounting surface and on the back) semi-finish all kinds of guide surface. Guide hole, residual machining process reference hole and height reference, and record the data;

6. Check and review the machining accuracy;

7. Fitter edging process;

8. Before processing, check the alignment of the datum surface of the process reference hole and the allowance of the insert;

9. Finishing surface 2D.3D, side punching surface and hole position, precision die processing technology reference hole and height reference, finishing guide surface and guide hole;

10. Check and recheck the machining accuracy of hardware mould.

Notes for hardware mold processing:

1. Simple process preparation. The expression is detailed, and the processing content is expressed as numerically as possible;

2. Special emphasis should be placed on the key points, difficulties and techniques in processing;

3. A clear process expression is required;

4. If the insert needs to be processed separately, attention should be paid to the process requirements of processing accuracy;

5. For insert parts that need to be processed separately after combined processing, the process installation needs to be processed separately during combined processing.

6. In the mold processing, the spring is relatively easy to damage, so choose the mold spring with a long fatigue life.

Thank you for reading, the above is the introduction of the hardware mold processing process arrangement and precautions, some content from the network, for reference only. If you want to know more about the precision mold processing details, welcome to call for detailed inquiries, dedicated to your service.